Looking for the perfect trainer? Or an in-expensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The Hobbyking® ™ Bixler® ™ 2 ticks all of these boxes and more! The Bixler® ™ 2 has had some improvements to make it even better such as a bigger air inlet for better motor cooling.
This version of the Bixler® ™ 2 comes as a "Kit" which means that you will need a motor, ESC, servos, 6CH 2.4GHz radio system, a 3S 2200mAh lipoly battery and a battery charger. Just finish the assembly of the plane, setup your radio system and add your battery, power up the model and fly. It's that easy!
The Bixler® ™ 2 has all the right ingredients, starting with super tough EPO foam. The combination of size, low wing loading and a sleek fuselage makes for an excellent model with capable yet forgiving flight characteristics. The plug in wing makes the Bixler® ™ a practical model that is easy to transport to your favorite flying field and can be ready to fly in just minutes. Another practical feature of the Bixler® ™ 2 is its ability to accept a wide range of Lipoly sizes and/or FPV equipment courtesy of the enlarged canopy area. The Bixler® ™ 2 also comes with optional flaps which are pre-hinged (servos not included). The flaps are particularly ideal for FPV pilots carrying a heavier payload.
The larger wing, flaps & much larger canopy area mean that the Bixler® ™ 2 is now so much more versatile in terms of FPV use and for new pilots and experienced pilots alike who are simply flying for fun, these new design features, combined with the larger, more efficient prop mean that the Bixler® ™ 2 offers longer flight times. However you decide to fly the Bixler® ™ 2, you can be assured that it is still just as easy and fun to fly as ever!
• Easy and Fun to Fly
• Easy, Fast and Simple Assembly
• New Larger Canopy area to accommodate FPV equipment and/or larger flight battery
• Larger Wing Span for greater glide & Payload Carrying Capability
• Bigger air inlet to keep the motor cool.
• Plastic Landing Skid
• Pre-Installed Optional Flaps Mounted on Plastic Hinges (require Servos for operation - not included)
• Plug In Wings for Easy Transportation
• Pre-Installed Round Pin Hinges on Rudder & Elevator
Material: EPO Foam
Flying Weight: 760g
2 x Y Leads
2 x 150mm extension servo leads
Hook & Loop
2 x Spare Clevis
Horns & control Rods for Optional Flaps
1 x 2.4GHz 6CH transmitter and receiver
1 x 2200mAh 3S 20C lipoly battery
1 x battery charger
1 x 20A ESC
1 x 2620-1300KV Brushless Outrunner Motor
4 x 9g servos or six if you're using flaps
1 x Propeller 7x5
1 x Servo Reverser if using optional flaps
top of page
Out of Stock
bottom of page