top of page

The Micro PDB has been engineered to provide the highest possible performance and reliability in a 32*22mm & 4 layers PCB. It distributes power from a battery pack to 4 ESCs, as well as providing dual synchronised & regulated DC outputs for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc.

It offers a very compact solution to achieve 2A continuous output current over a wide input supply range(3S to 5S LiPo).

Features :

2oz copper & 4-layers PCB

ESC & Battery solder tabs in pairs

5V & 12V Output LED indicators & Short circuit tolerant

Micro size & lightweight

Specification :

General :

Input voltage range (3S-5S operation): 7 - 21V DC

Regulated 5V and 12V outputs

LED power indicators ( 5V & 12V outputs )

4 ESC outputs

ESC outputs :

Continuous current: 20A per output

Peak current (10 seconds/minute): 25A per output

BEC 5V output :

Designed for RC Receivers, Flight controllers, OSD, and Servos

DC/DC synchronous buck regulator

Voltage: 5.0 +/- 0.1VDC

Continuous current: 2 Amps (Max.2.5A 5s/minute)

Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)

Short-circuit tolerant (5 seconds/minute)BEC 12V output :The battery should be 4S~5S LiPo (12.8~21V DC)Standard output designed to power cameras and video transmitters,etcDC/DC synchronous buck regulator, Efficiency is up to 96%Voltage: 12.0 +/- 0.2VDCOutput Ripple: 20mV (VIn=16V, VOut=12V@2A Load)Continuous current: 2 Amps (Max.2.5A 5s/minute)Short-circuit tolerant (5 seconds/minute)BEC 12V @ 3S LiPo :Output voltage= 3S LiPo voltage x 95% Physical:Dimensions: 32 x 22 x 3 mmWeight: 3.5g

Matek Micro Power Distribution Board PDB w/ BEC 5V/12V

    bottom of page