top of page

Item name: Flysky FS2A 4CH Receiver
Channels: 4CH; Output signal: PWM; Frequency range: 2.408-2.475GHZ; Band width: 135
Receiver sensitivity: -92DBM; 2.4G mode: AFHDS 2A; Failfe: Yes
Supply voltage: 3.3-10V; Distance: 400+ meters; Working current: 20MA
Support: FS-I6, FS-I6X, FS-I6S, FS-TM8, FS-TM10, FS-I10 and other AFHDS 2A protocol transmitter
1. Press and hold the key on the receiver and connect the power to the receiver. The blue light on the receiver flashing, get into bindind mode.
2. Set the transmitter into bind mode (confirmed AFHDS 2A protocol). After getting into bind mode, the receiver light changes from flashing to slow flash.
3. Transmitter get out of bind mode, then the receiver blue light becomes bright. Indicates that the signal receive is successful.
Failsafe settings: The receiver can normally receive the transmitter signal, push the rocker to the the failsafe set, long press the receiver bind button, the blue light flashes quickly several times and then always bright , failsafe settings is successful.
colour: black
Material: PCB
Size: 11x25MM

Package Contents:
3 x FS2A-4CH receiver
2 x FS2A-4CH receiver

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.


FS2A 4CH AFHDS 2A Mini Compatible Receiver PWM Output for Flysky i6 i6X i6S / F

    bottom of page