SKU:17013 
 https://holybro.com/collections/telemetry-radios/products/sik-telemetry-radio-v3?variant=41562952302781
Max RF Power
20 dBm
 
Antenna Gain
2dBi
5dBi
RF Data Rates
2, 4, 8, 16, 32, 64(default), 96, 128, 192, 250 kbps
Serial Interface Data Rate
1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6(default), 115.2 kbps
Frequency Band
902MHz - 928MHz or 414MHz - 460MHz
Interference Immunity
Frequency Hopping Spread Spectrum (FHSS) Configurable duty cycle
Address Options
Network ID: 0 –255
Channels
Up to 50 Frequency Hopping Channels
Supported Network Topologies
Point-to-point
Configuration Method
MissionPlanner or AT Commands
Data Framing
Standard or MAVLink protocol framing
Error correction
Corrects up to 25% of bit errors with open-source SIK firmware
Serial Data Connector & Interface
6-pin JST-GH connector, 3.3V-TTL
USB
Micro-USB
Type-C
SMA Connector
RP-SMA female
Power Connector
NA
XT30
Operating Temperature
-40~85°C
Dimension
28 x 53 x 10.7mm (without antenna)
66.5 x 32 x 16.5mm (without antenna)
Weight
23.5g w/ antenna
67g w/ antenna
Input Voltage (DC)
5V
7~28V
 
 
2-way full-duplex communication through adaptive TDM UART interface
Transparent serial link
MAVLink protocol framing
Built in FT230X/FT23 USB to BASIC UART conversion IC
Electrical Data
Supply voltage:
100mW & 500mW version: 5V DC (from USB or JST-GH)
1W version: 7~28V DC via XT30
Transmit current: 100 mA at 20 dBm
Receive current: 25 mA
Serial interface: 3.3 V UART
Package Included
100mW 
Radio modules with antennas *2
Micro-USB to USB-A cable *1
Micro-USB to Micro-USB OTG adapter cable *1
Micro USB to Type-C Adapter
JST-GH-6P to JST-GH-6P cable *1 (for Pixhawk Standard FC)
JST-GH-6P to Molex DF13 6P (for Pix32, Pixhawk 2.4.6, etc.)