Product Information
Product Name: Flight Controller F405-WTE
Model Number: N/A
Manufacturer: Matek Systems
MCU: STM32F405RGT6, 168MHz , 1MB Flash
IMU: ICM42688-P
Baro: SPL06-001
OSD: AT7456E
Blackbox: MicroSD card slot
ESP WiFi Telemetry(MAVLink) or ExpressLRS 2.4G receiver(CRSF protocol)
6x UARTs, 1x Softserial1_Tx option(INAV)
12x PWM outputs
1x I2C
4x ADC (VBAT, Current, RSSI, Airspeed)
USB/Beep Extender with Type-C(USB2.0)
Dual Camera Inputs switch
9V(12V) for VTX power switch
6.8~30V DC IN (2~6S LiPo)
90A continuous, 220A peak Current Sense
BEC 5V 2A for FC
BEC 9V 2A for camera/VTX, 12V option
BEC Vx 8A cont. 10A Peak for servos, 5V, 6V or 7.2V option
LDO 3.3V 200mA
Supported Software: ArduPilot: MatekF405-TE, INAV: MATEKF405TE_SD
Website: www.mateksys.com
Product Usage Instructions
Connect the Flight Controller to a power source using the 6.8~30V DC IN (2~6S LiPo) input.
Use the Dual Camera Inputs switch to select between two camera sources.
If using a VTX, use the 9V(12V) for VTX power switch to turn it on and off.
Connect your receiver to the ESP WiFi Telemetry or ExpressLRS 2.4G receiver using the appropriate protocol.
Connect your USB device to the USB/Beep Extender with Type-C(USB2.0) port for data transfer.
If using ArduPilot, configure the Flight Controller using the MatekF405-TE software. If using INAV, configure using the MATEKF405TE_SD software.