top of page

Pixhawk 2.4.8 Autopilot
32 Bit Flight Controller
superior quality coplete kit
All items are in kit are good quality...

1. The advanced 32-bit ARM CortexM4 high-performance processors, can run NuttX RTOS real-time operating system;
2. 14 PWM / servo output;
3. Bus interface (UART, I2C, SPI, CAN);
4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe;
5. Provide automatic and manual modes;
6. Provide redundant power input and failover;
7. Multicolor LED lights;
8. Provide multi-tone buzzer Interface

9. Micro SD recording flight data;



1.32 2 MB flash STM32F427 Cortex M4, with hardware floating-point processing unit
2. frequency: 168MHZ, 256K RAM
3.32 STM32F103 backup coprocessor

1.L3GD20 3-axis digital gyroscope 16
2.LSM303D 3-axis accelerometer 14 / Magnetometer
3.MPU6000 6-axis accelerometer / magnetometer
4.MS5611 precision barometer
1 .5 high voltage compatible UART 1, 2 with hardware flow control
2. 2 CAN
3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input
4.SBUS compatible inputs and outputs
5.PPM Signal Input
6.RSSI (PWM or voltage) Input
9.3.3 and 6.6VADC input
10. External MICRO USB Interface

Packing list: (full set as your choose)

1xPixhawk 2.4.8 32bit ARM Flight Controller
1x pixhawk shock observer
1xSafety button
1x buzzer
1x4GB card (IO firmware has written)
1xNeo-M8N Gps Module
1xBlack Gps Holder
1xPower Module
1x433MHZ telemetry 500mmw
1x6pin turn 6pin cable
1x4pin turn 4pin cable
all wires included

Pixhawk 2.4.8 Gps M8n ublox telemetry 500mw 433mhz combo kit

    bottom of page